Specifications
- The front attachment gives the vehicle a striking and characteristic front view.
- A TÜV registration is not necessary.
- The M Performance exterior components have optimal aerodynamics and reinforce the sporty handling.
- The front attachment was u. a. checked for pedestrian protection requirements. All legal requirements are met.
- The carbon component consists of carbon fiber reinforced plastic (CFRP) and is sealed with clear varnish.
- The materials are UV and temperature resistant.
- The installation of the rear spoiler is not obligatory for the installation of the front attachment, but an optimal driving performance can only be achieved through a combination of the two products.
- The assembly must take place in a temperature range of 18°C to 35°C.
- When attaching exterior components using liquid adhesive (e.g. Betalink 1K), the curing times of the adhesives used must be observed.
- As a rule, the vehicle may not be moved for 24 hours.
- The vehicle is only suitable for car washes after 48 hours.
- All parts must be checked for accuracy of fit before installation on the vehicle.
- Any adhesive surfaces must be absolutely dry, clean and free of wax and grease.
Scope of delivery
- 1M Performance carbon front attachment.
- Part number:
- 51 19 2 475 168, 51192475168
- This kit contains the carbon fiber splitter (full kit) + the necessary rivets if needed/selected.


















