BMW G87 M2 Magnetic License Plate Holder Kit – Sleek Fitment

Say goodbye to the bulky factory license plate bracket on your BMW G87 M2. This magnetic license plate holder kit offers a clean, minimalist look while remaining strong and secure at any speed.

Instead of the large OEM plastic frame fixed with four screws, our kit uses two discreet magnetic mounts that install directly into the existing screw points on your front bumper — no additional drilling required. The license plate itself attaches with pre-applied 3M 5952 double-sided tape, ensuring a solid hold while still allowing for quick removal when necessary.

Need to take photos or videos of your car? Simply pull of the license plate and you are ready to take some shots without having your plate in the photos.

Engineered for performance, the kit has been tested up to 300 km/h on the Autobahn and proven over 8,000 km in all conditions — from alpine passes to city driving. Each part is 3D printed from PETG-CF for strength, weather resistance, and durability.

Specifications

• Strong magnet system holds license plate securely
• Easy to remove without tools
• Pre-applied 3M 5952 double-sided tape
• Tested at speeds up to 300 km/h
• Proven in real-world conditions over 5 months / 10,000 km
• Designed exclusively for the BMW G87 M2 front bumper
• Replaces bulky OEM BMW license plate bracket part nr.: 51138081233
• Uses the original holes that BMW drilled out in the factory or after delivery
• Designed and manufactured in Germany

Scope of delivery

• 2x magnetic bumper mounts (one per side)
• 2x magnetic plate mounts (one per side) with pre-applied 3M tape
• 4x installation screws (2 per side)
• 1x foam piece to protect the bumper 

Installation

Learn how to install the license plate holders.

FAQ

• Q: Is drilling required to install this kit?
  • No. The kit uses the two existing OEM screw points (2x on each side, 4x in total) on your G87 M2 bumper (given it was already drilled out at the BMW factory, or at your dealership). No additional drilling or permanent modifications are needed. But of course can be installed by drilling new holes to the front bumper.
• Q: Will the magnets hold at high speeds?
  • Yes. The system has been tested up to 300 km/h on the Autobahn and in various roads, remains secure in all weather conditions.
• Q: How do I attach the license plate to the mounts?
  • Each mount comes with pre-applied 3M 5952 double-sided tape. Simply press your plate onto the mounts for a secure fit. We recommend installing the license plate in a warm environment
• Q: How long do I need to wait after applying the 3M tape to my plate?
  • According to 3M, the tape reaches its final bonding potential after 72 hours at 20 Celsius temperature. At 20 Celsius, after 20 Minutes it reaches already 50%, after 1 hour 80%. The higher the temperature the quicker the bonding process. At 65 Celsius it reaches 100% after just one hour.
• Q: I don’t have the OEM plastic plate holder on my car, can I still install it?
  • Yes, you can still install these, in this case you’d need to drill 4 holes in your bumper (or simply install the screws, and they will cut the holes for themselves)
• Q: I have a shorter license plate, around 460mm, can I still use this?
  • Yes, the smallest license plate that would fit is 460mm, if you have a longer one or 460mm long, you can use this kit. Otherwise you’d need to drill some extra holes to fit this magnetic license plate holder.
• Q: Can I still use the drive through car wash?
  • Yes, you can still go through and use the automatic car washing places.
• Q: Is this product OEM?
  • No, this is an aftermarket solution designed by PaddleShifterz specifically for the BMW G87 M2. It replaces the bulky OEM bracket with a sleek, magnetic system.

kennzeichenhalter

Compatible Vehicles

This product can be installed to the following models: