PaddleShifterz Magnetic Rear License Plate Holder Kit

Description

Say goodbye to the fixed factory license plate bracket on your BMW or MINI. This magnetic license plate holder kit gives a clean, minimalist look while staying strong and secure at any speed.

Instead of the large OEM plastic frame fixed with two screws, one on each side, our kit uses two magnetic mounts that install directly into the existing screw points on your trunk. The plate itself attaches with pre-applied 3M 5952 double-sided tape, for a solid hold that still allows quick removal.

Need to take photos or videos of your car? Simply pull off the license plate and you’re ready to shoot without the plate in the picture.

Engineered for performance, the kit has been tested up to 300 km/h on the Autobahn and proven over 8,000 km in all conditions, from alpine passes to city driving. Each part is 3D printed from PETG-CF for strength, weather resistance and durability.

Spécifications

• Very strong magnet system holds the plate securely (over 10 kg per side)
• Easy to remove without any tools
• Pre-applied 3M 5952 double-sided tape
• Uses the original holes; no drilling
• No TÜV registration necessary
• Designed and manufactured in Germany

Fitment

• BMW and MINI models whose rear plate bracket is fixed with two screws, one on each side; the mounts use those existing screw points.

What you receive

• 2x magnetic mounts (one per side)
• 2x magnetic plate mounts (one per side) with pre-applied 3M tape
• 2x installation screws (one per side, 3 mm Allen)
• With the extra plate holders option: one more set of plate mounts, so you can swap to a different plate, for example at a show

FAQ

Will the magnets hold at high speeds?

Yes. The system has been tested up to 300 km/h on the Autobahn and on all kinds of roads, and stays secure in all weather conditions.

How do I attach the license plate to the mounts?

Each mount comes with pre-applied 3M 5952 double-sided tape. Simply press your plate onto the mounts. We recommend attaching the plate in a warm environment.

How long do I need to wait after applying the 3M tape to my plate?

According to 3M, the tape reaches its final bond strength after 72 hours at 20 °C. At 20 °C it reaches 50% after 20 minutes and 80% after 1 hour. The higher the temperature, the quicker it bonds: at 65 °C it reaches 100% after just one hour.

Can I still use an automatic car wash?

Yes, you can still use automatic car washes.

Is this product OEM?

No, this is an aftermarket solution designed by PaddleShifterz. It replaces the plastic bracket with an easy-to-use magnetic system.